3535 – TSH Stainless Nat
Note: If replacing an existing unit, the same or less btu output heater should be used. Contact us if you have questions.
Mounting kits are universal across all models. If you are replacing the same btu heater, the old mounting hardware can simply be transferred to the new unit.
Description
Heater Type: S34 TSH Stainless (Two Stage, Natural Gas, Stainless Steel Finish)
Output: Two heat settings – 25,000 btu Low / 34,000 btu High
Serial Number: 3535
Voltage: 24VAC
Mounting Height: 9-10 feet from the floor. Top clearance 18″ when heater is angled 30 degrees.
Coverage: Typical coverage is 10×10 ft area.
Literature: TSH Manuals, Field Wiring, Spec Sheet
Notes: This heater has never been installed. It does have substantial dents on the “lid” panel and dents above the grille. This heater has been bench tested and carries a 1 year warranty same as new.
